umu.sePublikationer
Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Tailoring the functionality of waste materials using hydrothermal carbonization for water treatment applications
Umeå universitet, Teknisk-naturvetenskapliga fakulteten, Kemiska institutionen.ORCID-id: 0000-0002-8890-835x
Umeå universitet, Teknisk-naturvetenskapliga fakulteten, Kemiska institutionen.
Umeå universitet, Teknisk-naturvetenskapliga fakulteten, Kemiska institutionen.
(MTC-Miljötekniskt Center AB)
Visa övriga samt affilieringar
(Engelska)Manuskript (preprint) (Övrigt vetenskapligt)
Abstract [en]

Purpose:

The material properties of carbons from hydrothermal carbonization (HTC), typically referred to as hydrochars, are crucial for hydrochar use in adsorption-related applications. More knowledge is needed on how HTC temperature is altering material properties of different wet low-cost materials and how it is affecting adsorption of contaminants. Studies systematically comparing different feedstocks and carbonization temperatures are needed, because comparisons between available studies are obstructed by the differences in reaction conditions and analysis techniques. 

Methods: In this study, hydrochars were prepared at 180℃, 220℃, and 260℃ from fiber sludge and biosludge from a paper mill, digested sewage sludge, and horse manure. Surface properties of the raw materials and chars were characterized and the adsorption capacity of methylene blue was studied. 

Results: The most substantial change, i.e., a decrease in the oxygen-functionalities of cellulose-rich materials (horse manure and fiber sludge), was caused by degradation of cellulose, while digested sludge types (biosludge and sewage sludge) seemed not to change substantially with the HTC temperature. Adsorption capacities varied between 9.0 and 68 mg g-1 char, being highest for biosludge treated at 220℃. Adsorption dropped drastically at the highest HTC temperature (260℃), which may be due to the decrease in oxygen-containing functionalities. Also substantial differences were seen between different feedstock materials. 

Conclusions: These results suggest that adsorption properties can be tailored both by selection of HTC temperature and feedstock.

Nyckelord [en]
Hydrochar, surface properties, paper mill sludge, digested sludge, horse manure, adsorption
Nationell ämneskategori
Annan kemi
Identifikatorer
URN: urn:nbn:se:umu:diva-158502OAI: oai:DiVA.org:umu-158502DiVA, id: diva2:1307823
Tillgänglig från: 2019-04-29 Skapad: 2019-04-29 Senast uppdaterad: 2019-04-30
Ingår i avhandling
1. Tailoring residue-derived carbon materials for the removal of wastewater contaminants: adsorption and surface properties
Öppna denna publikation i ny flik eller fönster >>Tailoring residue-derived carbon materials for the removal of wastewater contaminants: adsorption and surface properties
2019 (Engelska)Doktorsavhandling, sammanläggning (Övrigt vetenskapligt)
Abstract [en]

The availability of effective, low-cost wastewater treatment is necessary for increased water recycling and the prevention of environmental pollution on a global scale. Adsorption on activated carbons is commonly applied in wastewater treatment, but the high cost of conventional activated carbons limits the use of this technique. Several waste streams, such as the residues and by-products of food processing, agriculture and industrial processes, are currently inefficiently utilized and could be transformed into value-added carbon materials. Re-thinking how waste is utilized could reduce waste handling costs and increase resource efficiency, which would provide both economic and environmental benefits. Therefore, low-cost carbon materials prepared from renewable low-cost resources are an attractive alternative to decreasing the costs of wastewater treatment.

The research underlying this thesis investigated the potential of carbonized residue materials to remove environmentally relevant concentrations of organic and inorganic contaminants from wastewater. The research covered in this thesis included the carbonization of tomato- and olive press wastes, rise husks, horse manure, municipal wastewater sludge and bio- and fiber sludges from pulp and paper mills. The effect of carbonization temperature and starting material was studied in terms of surface properties and contaminant removal to gain knowledge on which surface features are beneficial for the removal of different contaminants. The extent to which different chemical activations of carbonized materials improve the contaminant removal was also studied.

The results demonstrate that carbonized materials are generally quite ineffective at removing organic compounds from water, which may be due to the low surface areas of these materials. Carbonization temperature was shown to alter the surface functionalities of the carbons, more specifically, high carbonization temperatures decreased oxygen-containing surface functionalities that benefitted the removal of most contaminants (which was most pronounced for Zn and trimethoprim). Further experiments investigated the role of the water matrix, and the results unexpectedly showed higher removal from a complex water matrix. Chemical activation improved removal efficiencies for all of the studied compounds, with the most pronounced effects observed for organic compounds. The activated carbons were able to completely remove fluconazole and trimethoprim from the landfill leachate water, and also showed high removal efficiensies (50-96%) of Cu and Zn. Furthermore, the results showed that adsorbate compounds may interact with the adsorbent surface in diverse ways, for example, via properties such as porosity and the presence of oxygen-containing functionalities or minerals. Also, adsorbate hydrophobicity (log Kow) affected the removal of organic compounds in some of the studied hydrochars. The research discussed in this thesis has highlighted that future studies should study the broad range of environmentally-relevant adsorbates through multi-component adsorption systems that include several complex water matrices.

Ort, förlag, år, upplaga, sidor
Umeå: Umeå universitet, 2019. s. 69
Nyckelord
Adsorption, hydrochar, HTC, chemical activation, wastewater, pharmaceuticals, metals, surface properties, biobased residues
Nationell ämneskategori
Annan kemi
Identifikatorer
urn:nbn:se:umu:diva-158507 (URN)978-91-7855-071-5 (ISBN)
Disputation
2019-05-24, KB.E3.01 (Lilla Hörsalen), KBC-huset, Umeå, 09:00 (Engelska)
Opponent
Handledare
Tillgänglig från: 2019-05-03 Skapad: 2019-04-29 Senast uppdaterad: 2019-05-02Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Personposter BETA

Niinipuu, MirvaLatham, Kenneth G.Boily, Jean-FrancoisJansson, Stina

Sök vidare i DiVA

Av författaren/redaktören
Niinipuu, MirvaLatham, Kenneth G.Boily, Jean-FrancoisJansson, Stina
Av organisationen
Kemiska institutionen
Annan kemi

Sök vidare utanför DiVA

GoogleGoogle Scholar

urn-nbn

Altmetricpoäng

urn-nbn
Totalt: 122 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf