umu.sePublikationer
Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Mechanisms of bed agglomeration during fluidized-bed combustion of biomass fuels
Umeå universitet, Teknisk-naturvetenskaplig fakultet, Tillämpad fysik och elektronik. Umeå universitet, Teknisk-naturvetenskaplig fakultet, Tillämpad fysik och elektronik, Energiteknik och termisk processkemi.
Umeå universitet.
Umeå universitet, Teknisk-naturvetenskaplig fakultet, Tillämpad fysik och elektronik. Umeå universitet, Teknisk-naturvetenskaplig fakultet, Tillämpad fysik och elektronik, Energiteknik och termisk processkemi.
2005 (Engelska)Ingår i: Energy & Fuels, ISSN 0887-0624, E-ISSN 1520-5029, Vol. 19, nr 3, s. 825-832Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

The major ash-related problem encountered in fluidized beds is bed agglomeration, which, in the worst case, may result in total defluidization of the bed and unscheduled downtime. Because of the special ash-forming constituents of biomass fuels, several of these fuels have been shown to be especially problematic. Despite the frequent reporting, a precise and quantitative knowledge of the bed agglomeration process during fluidized bed combustion of biomass fuels has not yet been presented. Bed sampling versus operation time was performed in four different biomass-fired full-scale fluidized beds, as well as during controlled fluidized bed agglomeration tests in bench-scale testing of five representative biomass fuels. The bed materials and agglomerates were further analyzed using scanning electron microscopy, coupled with energy-dispersive spectroscopy SEM/EDS, to determine the characteristics of the formed bed particle layers. For typical wood fuels, coating-induced agglomeration with subsequent attack reaction and diffusion by calcium into the quartz was identified to be the dominating bed agglomeration mechanism. Low-melting calcium-based silicates (including minor amounts of, for example, potassium) were formed with subsequent viscous-flow sintering and agglomeration. For high-alkali-containing biomass fuels, direct attack of the quartz bed particle by potassium compounds in a gas or aerosol phase formed a layer of low-melting potassium silicate. Thus, formation and subsequent viscous-flow sintering and agglomeration seemed to be the dominating agglomeration mechanism for these fuels.

Ort, förlag, år, upplaga, sidor
American Chemical Society , 2005. Vol. 19, nr 3, s. 825-832
Identifikatorer
URN: urn:nbn:se:umu:diva-26215DOI: 10.1021/ef0400868OAI: oai:DiVA.org:umu-26215DiVA, id: diva2:240864
Tillgänglig från: 2009-09-30 Skapad: 2009-09-30 Senast uppdaterad: 2017-12-13

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltext
Av organisationen
Tillämpad fysik och elektronikEnergiteknik och termisk processkemiUmeå universitet
I samma tidskrift
Energy & Fuels

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
urn-nbn

Altmetricpoäng

doi
urn-nbn
Totalt: 289 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf