Stable walking gaits for a three-link planar biped robot with one actuatorShow others and affiliations
2013 (English)In: IEEE Transactions on robotics, ISSN 1552-3098, E-ISSN 1941-0468, IEEE transactions on robotics, Vol. 29, no 3, p. 589-601Article in journal (Refereed) Published
Abstract [en]
We consider a benchmark example of a three-link planar biped walker with torso, which is actuated in between the legs. The torso is thought to be kept upright by two identical torsional springs. The mathematical model reflects a three-degree-of-freedom mechanical system with impulse effects, which describe the impacts of the swing leg with the ground, and the aim is to induce stable limit-cycle walking on level ground. The main contribution is a novel systematic trajectory planning procedure for solving the problem of gait synthesis. The key idea is to find a system of ordinary differential equations for the functions describing a synchronization pattern for the time evolution of the generalized coordinates along a periodic motion. These functions, which are known as virtual holonomic constraints, are also used to compute an impulsive linear system that approximates the time evolution of the subset of coordinates that are transverse to the orbit of the continuous part of the periodic solution. This auxiliary system, which is known as transverse linearization, is used to design a nonlinear exponentially orbitally stabilizing feedback controller. The performance of the closed-loop system and its robustness with respect to various perturbations and uncertainties are illustrated via numerical simulations.
Place, publisher, year, edition, pages
2013. Vol. 29, no 3, p. 589-601
Keywords [en]
Biped robots, holonomic servoconstraints, limit-cycle walking, orbital stabilization, trajectory planning with dynamic constraints, transverse linearization, underactuated mechanical systems, virtual holonomic constraints
National Category
Robotics Veterinary Science
Identifiers
URN: urn:nbn:se:umu:diva-39717DOI: 10.1109/TRO.2013.2239551ISI: 000320137200001OAI: oai:DiVA.org:umu-39717DiVA, id: diva2:395229
Funder
Swedish Research Council, 2008-4369
Note
Funding Agency, Grant Number:
Russian Federal Agency for Science and Innovation, 02.740.11.505
Russian Federal Target Program "Research & Development in Priority Areas", 11.519.11.4007
Norwegian Research Council under KMB grant Next Generation Robotics for Norwegian Industry
Norwegian Research Council under FRIPRO Grant, 214525/F20
Russian Foundation for Basic Research, 12-01-00808
2011-02-042011-02-042018-06-08Bibliographically approved
In thesis