Umeå universitets logga

This article aims to offer a detailed review of bacterial nanocellulose (BNC), addressing its growing global relevance and exploring sustainable approaches through the use of agro-industrial residues as viable cultivation alternatives. BNC is a biopolymer produced by different microorganisms, with Komagateibacter xylinum being the most commonly used in this process. Its distinction in relation to vegetable cellulose lies mainly in its nanometric properties, such as water retention capacity, large surface area and structural resistance. The search for alternative sources has been explored for the large-scale production of biopolymers such as polyhydroxybutyrate (PHB) and exopolysaccharides (EPS) from lignocellulosic biomass. The application of different residues from agroindustry, food and forestry as a source of carbon and nutrients in the biosynthesis of BNC has proven to be a promising strategy to make the production process economically viable. A significant advantage of the BNC biosynthesis process is the virtually natural purity of the cellulose produced, eliminating the need for expensive purification steps. There has been a significant increase in the number of patents related to the use of lignocellulosic biomass, filed by academic institutions and private companies in the last five years. In this context, this study condenses the fundamental principles of BNC, offers a trend analysis through bibliometric review and investigates the current panorama in BNC production, as well as its diverse applications in a wide range of sectors, such as medicine (medical devices, tissue engineering), packaging (biodegradable films, coatings), textiles (smart materials, functional fabrics), construction (sustainable materials), electronics (flexible electronic components) and other innovative areas that benefit from the unique properties of bacterial nanocellulose.

Bioethanol is the most commonly used biofuel. It is an alternative to replace fossil fuels in renewable energy; it can be produced from lignocellulosic feedstock using a biotechnological process. Their participation of microorganisms is crucial in the bioconversion process of fermentation for ethanol production and can involve bacteria, fungi, and yeasts. However, when working within bioethanol processes from lignocellulose feedstock, microorganisms face some challenges, such as high temperature, high solids content, and the ability to ferment sugars for high ethanol concentration. Such challenges will depend on operative strategies, such as simultaneous saccharification and fermentation, separate hydrolysis and fermentation, semi-simultaneous saccharification and fermentation, and consolidated bioprocessing; these are the most common configurations. This review presents different trends of the microbial role, biochemical application, and fermentation operative strategies for bioethanol production of the second generation.

Sugarcane bagasse was pretreated with dilute phosphoric acid or sulfuric acid to facilitate cellulose hydrolysis and lignin extraction. With phosphoric acid, only 8 % of the initial cellulose was lost after delignification, whereas pretreatment with sulfuric acid resulted in the solubilization of 38 % of the initial cellulose. After enzymatic hydrolysis, the process using phosphoric acid produced approximately 35 % more glucose than that using sulfuric acid. In general, the lignins showed 95–97 % purity (total lignin, w/w), an average molar mass of 9500–10,200 g mol⁻¹, a glass transition temperature of 140–160 °C, and a calorific value of 25 MJ kg⁻¹. Phosphoric acid lignin (PAL) was slightly more polar than sulfuric acid lignin (SAL). PAL had 13 % more oxidized units and 20 % more OH groups than SAL. Regardless of the acid used, the lignins shared similar properties, but differed slightly in the characteristics of their functional groups and chemical bonds. These findings show that pretreatment catalyzed with either of the two acids resulted in lignin with sufficiently good characteristics for use in industrial processes.

Bioconversion in biorefineries is a way to valorize residues from agriculture and food processing. Pretreatment is an important step in the bioconversion of lignocellulosic materials, including crop residues. This Special Issue includes nine articles on several pretreatment and bioconversion approaches applied to different agricultural residues and food-processing by-products. The materials addressed in this collection cover straw from wheat, rye, and miscanthus, olive tree pruning residue, almond shells and husks, avocado waste, sweet sorghum bagasse, soybean meal, and residues of non-edible oilseeds.

The extraction of bioactive compounds and cellulose saccharification are potential directions for the valorization of spent mushroom substrate (SMS). Therefore, investigating the suitability of different extraction methods for recovering bioactive compounds from SMS and how the extraction affects the enzymatic saccharification is of uppermost relevance. In this work, bioactive compounds were extracted from Pleurotus spp. SMS using four extraction methods. For Soxhlet extraction (SoE), a 40:60 ethanol/water mixture gave the highest extraction efficiency (EE) (69.9–71.1%) among the seven solvent systems assayed. Reflux extraction with 40:60 ethanol/water increased the extraction yield and EE compared to SoE. A shorter reflux time yielded a higher extraction of carbohydrates than SoE, while a longer time was more effective for extracting phenolics. The extracts from 240 min of reflux had comparable antioxidant activity (0.3–0.5 mM GAE) with that achieved for SoE. Ultrasound-assisted extraction (UAE) at 65 °C for 60 min allowed an EE (~82%) higher than that achieved by either reflux for up to 150 min or SoE. Subcritical water extraction (SWE) at 150 °C resulted in the best extraction parameters among all the tested methods. Vanillic acid and chlorogenic acid were the primary phenolic acids identified in the extracts. A good correlation between the concentration of caffeic acid and the antioxidant activity of the extracts was found. Saccharification tests revealed an enhancement of the enzymatic digestibility of SMS cellulose after the extraction of bioactive compounds. The findings of this initial study provide indications on new research directions for maximizing the recovery of bioactive compounds and fermentable sugars from SMS.

Biodiesel production currently follows a first-generation model using edible oils as raw materials. Such a production model is unsustainable, considering that it is limited by the high cost of edible oils, competes with the food sector, and is linked to deforestation and other environmental threats. Changing the raw material base to non-edible oils provides an opportunity to increase the sustainability of the biodiesel industry and to avoid conflicts with food production. Processing non-edible oilseeds for extracting the oil to be used for producing biodiesel generates large amounts of residues, such as de-oiled cakes, seed husks, and fruit shells and pods as well as plant stems and leaves resulting from pruning and other agronomy practices. Most of those residues are currently disposed of by burning or used in a suboptimal way. Bioconversion following the sugar platform route, anaerobic digestion, or enzyme production provides means for upgrading them to advanced biofuels and high-added value products. Bioconversion of plant biomass, including oilseed residues, requires pretreatment to enhance their susceptibility to enzymes and microorganisms. This review provides an outlook on bioconversion approaches applicable to different residues of oilseed-bearing plant species. Recent reports on the pretreatment of non-edible oilseed residues for enhancing their bioconversion through either the sugar platform route or anaerobic digestion are critically discussed. This review is based on an exhaustive Web of Science search performed in January–May 2023.

The global production of fossil-based plastics has reached critical levels, and their substitution with bio-based polymers is an urgent requirement. Poly(3-hydroxybutyrate) (PHB) is a biopolymer that can be produced via microbial cultivation, but efficient microorganisms and low-cost substrates are required. Halomonas boliviensis LC1, a moderately halophilic bacterium, is an effective PHB producer, and hydrolysates of the residual stalks of quinoa (Chenopodium quinoa Willd.) can be considered a cheap source of sugars for microbial fermentation processes in quinoa-producing countries. In this study, H. boliviensis LC1 was adapted to a cellulosic hydrolysate of quinoa stalks obtained via acid-catalyzed hydrothermal pretreatment and enzymatic saccharification. The adapted strain was cultivated in hydrolysates and synthetic media, each of them with two different initial concentrations of glucose. Cell growth, glucose consumption, and PHB formation during cultivation were assessed. The cultivation results showed an initial lag in microbial growth and glucose consumption in the quinoa hydrolysates compared to cultivation in synthetic medium, but after 33 h, the values were comparable for all media. Cultivation in hydrolysates with an initial glucose concentration of 15 g/L resulted in a higher glucose consumption rate (0.15 g/(L h) vs. 0.14 g/(L h)) and volumetric productivity of PHB (14.02 mg/(L h) vs. 10.89 mg/(L h)) than cultivation in hydrolysates with 20 g/L as the initial glucose concentration. During most of the cultivation time, the PHB yield on initial glucose was higher for cultivation in synthetic medium than in hydrolysates. The produced PHBs were characterized using advanced analytical techniques, such as high-performance size-exclusion chromatography (HPSEC), Fourier transform infrared (FTIR) spectroscopy, 1H nuclear magnetic resonance (NMR) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), and thermogravimetric analysis (TGA). HPSEC revealed that the molecular weight of PHB produced in the cellulosic hydrolysate was lower than that of PHB produced in synthetic medium. TGA showed higher thermal stability for PHB produced in synthetic medium than for that produced in the hydrolysate. The results of the other characterization techniques displayed comparable features for both PHB samples. The presented results show the feasibility of producing PHB from quinoa stalks with H. boliviensis.