Umeå universitets logga

Species belonging to the Bacillus cereus group form endospores (spores) whose surface is decorated with micrometers-long and nanometers-wide endospore appendages (Enas). The Enas have recently been shown to represent a completely novel class of Gram-positive pili. They exhibit remarkable structural properties making them extremely resilient to proteolytic digestion and solubilization. However, little is known about their functional and biophysical properties. In this work, we apply optical tweezers to manipulate and assess how wild type and Ena-depleted mutant spores immobilize on a glass surface. Further, we utilize optical tweezers to extend S-Ena fibers to measure their flexibility and tensile stiffness. Finally, by oscillating single spores, we examine how the exosporium and Enas affect spores’ hydrodynamic properties. Our results show that S-Enas (μm long pili) are not as effective as L-Enas in immobilizing spores to glass surfaces but are involved in forming spore to spore connections, holding the spores together in a gel-like state. The measurements also show that S-Enas are flexible but tensile stiff fibers, which support structural data suggesting that the quaternary structure is composed of subunits arranged in a complex to produce a bendable fiber (helical turns can tilt against each other) with limited axial fiber extensibility. Lastly, the results show that the hydrodynamic drag is 1.5-times higher for wild type spores expressing S- and L-Enas compared to mutant spores expressing only L-Enas or ”bald spores” lacking Ena, and 2-times higher compared to spores of the exosporium deficient strain. This study unveils novel findings on the biophysics of S- and L-Enas, their role in spore aggregation, binding of spores to glass, and their mechanical behavior upon exposure to drag forces.

Endospore-forming bacteria are associated with food spoilage, food poisoning, and infection in hospitals. Therefore, methods to monitor spore metabolic activity and verify sterilization are of great interest. However, current methods for tracking metabolic activity are time-consuming and resource intensive. This work investigates isotope labeling and Raman microscopy as a low-cost rapid alternative. Specifically, we monitor the Raman spectrum of enterotoxic \textit{B. cereus} spores undergoing germination and cell division in D2O-infused broth. During germination and cell division, water is metabolized and deuterium from the broth is incorporated into proteins and lipids, resulting in the appearance of a Raman peak related to C-D bonds at 2190 cm-1. We find that a significant C-D peak appears after 2 h of incubation at 37◦C. Further, we found that the peak appearance coincides with the observed first cell division indicating little metabolic activity during germination. Lastly, the germination and cell growth rate of spores were not affected by adding 30 % heavy water to the broth. This shows the potential for real-time monitoring of metabolic activity from a bacterial spore to a dividing cell. In conclusion, our work proposes tracking the evolution of the C-D Raman peak in spores incubated with D2O-infused broth as an effective and time-, and cost-efficient method to monitor the outgrowth of a spore population, simultaneously allowing us to track for how long the bacteria have grown and divided.

Conjugation is used by bacteria to propagate antimicrobial resistance (AMR) in the environment. Central to this process are widespread conjugative F-pili that establish the connection between donor and recipient cells, thereby facilitating the spread of IncF plasmids among enteropathogenic bacteria. Here, we show that the F-pilus is highly flexible but robust at the same time, properties that increase its resistance to thermochemical and mechanical stresses. By a combination of biophysical and molecular dynamics methods, we establish that the presence of phosphatidylglycerol molecules in the F-pilus contributes to the structural stability of the polymer. Moreover, this structural stability is important for successful delivery of DNA during conjugation and facilitates rapid formation of biofilms in harsh environmental conditions. Thus, our work highlights the importance of F-pilus structural adaptations for the efficient spread of AMR genes in a bacterial population and for the formation of biofilms that protect against the action of antibiotics.

Bacterial adhesion pili are key virulence factors that mediate host-pathogen interactions in diverse epithelial environments. Deploying a multimodal approach, we probed the structural basis underpinning the biophysical properties of pili originating from enterotoxigenic (ETEC) and uropathogenic bacteria. Using cryo-electron microscopy we solved the structures of three vaccine target pili from ETEC bacteria, CFA/I, CS17, and CS20. Pairing these and previous pilus structures with force spectroscopy and steered molecular dynamics simulations, we find a strong correlation between subunit-subunit interaction energies and the force required for pilus unwinding, irrespective of genetic similarity. Pili integrate three structural solutions for stabilizing their assemblies: layer-to-layer interactions, N-terminal interactions to distant subunits, and extended loop interactions from adjacent subunits. Tuning of these structural solutions alters the biophysical properties of pili and promotes the superelastic behavior that is essential for sustained bacterial attachment.

Adhesive pili assembled via the chaperone-usher pathway (CUP) are hair-like appendages that mediate host tissue colonization and biofilm formation of Gram-negative bacteria ^1-3. Archaic CUP pili, the most diverse and widespread CUP adhesins, are promising vaccine and drug targets due to their prevalence in the most troublesome multidrug-resistant (MDR) pathogens ^1,4,5. However, their architecture and assembly-secretion process remain unknown. Here, we present the 3.4 Å resolution cryo-electron microscopy structure of the prototypical archaic Csu pilus that mediates biofilm formation of Acinetobacter baumannii, a notorious MDR nosocomial pathogen. In contrast to the thick helical tubes of the classical type 1 and P pili, archaic pili assemble into a conceptually novel ultrathin zigzag architecture secured by an elegant clinch mechanism. The molecular clinch provides the pilus with high mechanical stability as well as superelasticity, a property observed now for the first time in biomolecules, while enabling a more economical and faster pilus production. Furthermore, we demonstrate that clinch formation at the cell surface drives pilus secretion through the outer membrane. These findings suggest that clinch-formation inhibitors might represent a new strategy to fight MDR bacterial infections.

Enterotoxigenic Escherichia coli (ETEC) are pathogenic bacteria that cause diarrheal disease that disrupts the nutrition and the growth of children under the age of 5 and causes illness in travelers to countries where these bacteria are endemic. ETEC express long thin helical filaments on their surface, ∼1 micron long and 8 nm in diameter, called pili or fimbriae. Often essential virulence factors, these filaments, including ETEC CS20 pili, are composed of approximately 1,000 copies of the major pilin protein and one copy of a tip protein that provides binding specificity. While the structures of ETEC pili from different strains are similar, there are critical differences that alter their biophysical properties.

ETEC express Class 1 and/or Class 5 pilins. The Class 1 CS20 pilin, CsbA, is genetically similar to FimA from Type 1 pili that are expressed on many strains of Escherichia coli, including bacteria that infect the urinary tract or the gastrointestinal tract, and also to PapA pilins expressed on bacteria that infect the kidneys. Thus, despite CS20 being expressed on ETEC, its pilin is genetically distant from the Class 5 CFA/I pilin, CfaB, the most commonly expressed ETEC pilin.

We show here the three-dimensional structure and surface coulombic charge of CS20 pili, determined at 3.4 Å resolution by electron cryomicroscopy (cryo-EM). Our force spectroscopy data show that CS20 pili have a helix unwinding force that is twice that of CFA/I pili, and half that of Type 1 pili. Molecular dynamics simulations are further used to unveil features along the unwinding pathway at an atomistic scale. We see that CS20 pili bridge the genetic and environmental gap between Class 1 and Class 5 adhesion pili that are expressed on pathogenic bacteria.

Diseases caused by pathogenic agents such as bacteria and viruses result in devastating costs on personal and societal levels. However, it is not just the emergence of new diseases that is problematic. Antibiotic resistance among bacteria makes uncomplicated infections difficult and lethal. Resilient disease-causing spores spread in hospitals, the food industry, and water supplies requiring effective detection and disinfection methods. Further, we face complex neurological diseases where no effective treatment or diagnostic methods exist. Thus, we must increase our fundamental understanding of these diseases to develop effective diagnostic, detection, disinfection, and treatment methods.

Classically, the methods used for detecting and studying the underlying mechanics of pathogenic agents work on a large scale, measuring the average macroscopic behavior and properties of these pathogens. However, just as with humans, the average behavior is not always representative of individual behavior. Therefore, it is also essential to investigate the characteristics of these pathogens on a single cell or particle level. 

This thesis develops and applies optical techniques to characterize pathogenic biomaterial on a single cell or particle level. At the heart of all these studies is our Optical Tweezers (OT) instrument. OT are a tool that allows us to reach into the microscopic world and interact with it. Finally, by combining OT with other experimental techniques, we can chemically characterize biomaterials and develop assays that mimic different biological settings. Using these tools, we investigate bacterial adhesion, disinfection, and detection of pathogenic spores and proteins.

Hopefully, the insights of these studies can lessen the burden on society caused by diseases by helping others develop effective treatment, diagnostic, detection, and disinfection methods in the future. 

Micro-Raman spectroscopy combined with optical tweezers is a powerful method to analyze how the biochemical composition and molecular structures of individual biological objects change with time. In this work we investigate laser induced effects in the trapped object. Bacillus thuringiensis spores, which are robust organisms known for their resilience to light, heat, and chemicals are used for this study. We trap spores and monitor the Raman peak from CaDPA (calcium dipicolinic acid), which is a chemical protecting the spore core. We see a correlation between the amount of laser power used in the trap and the release of CaDPA from the spore. At a laser power of 5 mW, the CaDPA from spores in water suspension remain intact over the 90 min experiment, however, at higher laser powers an induced effect could be observed. SEM images of laser exposed spores (after loss of CaDPA Raman peak was confirmed) show a notable alteration of the spores' structure. Our Raman data indicates that the median dose exposure to lose the CaDPA peak was ∼60 J at 808 nm. For decontaminated/deactivated spores, i.e., treated in sodium hypochlorite or peracetic acid solutions, the sensitivity on laser power is even more pronounced and different behavior could be observed on spores treated by the two chemicals. Importantly, the observed effect is most likely photochemical since the increase of the spore temperature is in the order of 0.1 K as suggested by our numerical multiphysics model. Our results show that care must be taken when using micro-Raman spectroscopy on biological objects since photoinduced effects may substantially affect the results.

Visualizing medical images from patients as physical 3D models (phantom models) have many roles in the medical field, from education to preclinical preparation and clinical research. However, current phantom models are generally generic, expensive, and time-consuming to fabricate. Thus, there is a need for a cost- and time-efficient pipeline from medical imaging to patient-specific phantom models. In this work, we present a method for creating complex 3D sacrificial molds using an off-the-shelf water-soluble resin and a low-cost desktop 3D printer. This enables us to recreate parts of the cerebral arterial tree as a full-scale phantom model (10×6×410×6×4 cm) in transparent silicone rubber (polydimethylsiloxane, PDMS) from computed tomography angiography images (CTA). We analyzed the model with magnetic resonance imaging (MRI) and compared it with the patient data. The results show good agreement and smooth surfaces for the arteries. We also evaluate our method by looking at its capability to reproduce 1 mm channels and sharp corners. We found that round shapes are well reproduced, whereas sharp features show some divergence. Our method can fabricate a patient-specific phantom model with less than 2 h of total labor time and at a low fabrication cost.

Dipicolinic acid (DPA) is an essential component for the protection of DNA in bacterial endospores and is often used as a biomarker for spore detection. Depending upon the pH of the solution, DPA exists in different ionic forms. Therefore, it is important to understand how these ionic forms influence spectroscopic response. In this work, we characterize Raman and absorption spectra of DPA in a pH range of 2.0–10.5. We show that the ring breathing mode Raman peak of DPA shifts from 1003 cm−1 to 1017 cm−1 and then to 1000 cm−1 as pH increases from 2 to 5. The relative peak intensities related to the different ionic forms of DPA are used to experimentally derive the pKa values (2.3 and 4.8). We observe using UV–vis spectroscopy that the changes in the absorption spectrum of DPA as a function of pH correlate with the changes observed in Raman spectroscopy, and the same pKa values are verified. Lastly, using fluorescence spectroscopy and exciting a DPA solution at between 210–330 nm, we observe a shift in fluorescence emission from 375 nm to 425 nm between pH 2 and pH 6 when exciting at 320 nm. Our work shows that the different spectral responses from the three ionic forms of DPA may have to be taken into account in, e.g., spectral analysis and for detection applications.