Umeå universitets logga

umu.sePublikationer
Ändra sökning
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf
Effects of pretreatments and hydrothermal aging on biaxial flexural strength of lithium di-silicate and Mg-PSZ ceramics
Umeå universitet, Medicinska fakulteten, Institutionen för odontologi.
Umeå universitet, Medicinska fakulteten, Institutionen för odontologi.
Umeå universitet, Medicinska fakulteten, Institutionen för odontologi.
Research and Development, Cad.esthetics AB, Skellefteå, Sweden.
2016 (Engelska)Ingår i: Journal of Dentistry, ISSN 0300-5712, E-ISSN 1879-176X, Vol. 55, s. 25-32Artikel i tidskrift (Refereegranskat) Published
Abstract [en]

Objectives: To evaluate the effect of specimen thickness, pretreatment and hydrothermal aging on the biaxial flexural strength (BFS) of lithium di-silicate glass (e.max Cad) and magnesia-stabilized zirconia (ZirMagnum) ceramic discs. Methods: The e.max Cad discs was studied: i) crystallized, ii) crystallized and glazed and iii) crystallized, glazed and unglazed side etched with hydrofluoric acid. The ZirMagnum discs were studied: i) as delivered, ii) after sandblasting and iii) after heat treatment similar to veneering. Hydrothermal aging was simulated by autoclave treatment. Results: The BFS of all the ZirMagnum specimens was superior (p < 0.001) to all the e.max Cad specimens. Glazing the 0.4 mm e.max Cad discs reduced (p < 0.05) their BFS compared with the unglazed 0.8 mm specimens, whereas glazing of 0.8 mm discs had no influence (p > 0.05) on the strength. Etching and autoclaving of e.max Cad did not affect (p > 0.05) the BFS. For ZirMagnum sandblasting with 0.2 MPa or 0.6 MPa did not influence the biaxial flexural strength (p > 0.05), whereas heat treatment reduced (p < 0.01) the BFS of 0.6 MPa sandblasted ZirMagnum. Autoclaving reduced the strength (p < 0.05) compared with ZirMagnum as delivered, whereas autoclaving of the 0.6 MPa sandblasted and heat treated specimens did not influence (p > 0.05) the BFS. Glazing, etching and sandblasting increased (p < 0.05) surface roughness. Conclusions: The effects of glazing, heat treatment, aging and mechanical treatment of the materials evaluated should be considered since their strength could be affected. Clinical significance: Mechanical properties of restorations made from prefabricated ceramic blocks could be affected of various treatments and could change over time.

Ort, förlag, år, upplaga, sidor
2016. Vol. 55, s. 25-32
Nyckelord [en]
Accelerated aging, Ceramic, CAD/CAM, Magnesia-stabilized zirconia
Nationell ämneskategori
Odontologi
Identifikatorer
URN: urn:nbn:se:umu:diva-126919DOI: 10.1016/j.jdent.2016.09.002ISI: 000390738500004PubMedID: 27638179Scopus ID: 2-s2.0-84991216968OAI: oai:DiVA.org:umu-126919DiVA, id: diva2:1039050
Tillgänglig från: 2016-10-20 Skapad: 2016-10-20 Senast uppdaterad: 2023-03-24Bibliografiskt granskad

Open Access i DiVA

Fulltext saknas i DiVA

Övriga länkar

Förlagets fulltextPubMedScopus

Person

André, MariaKou, WenSjögren, Göran

Sök vidare i DiVA

Av författaren/redaktören
André, MariaKou, WenSjögren, Göran
Av organisationen
Institutionen för odontologi
I samma tidskrift
Journal of Dentistry
Odontologi

Sök vidare utanför DiVA

GoogleGoogle Scholar

doi
pubmed
urn-nbn

Altmetricpoäng

doi
pubmed
urn-nbn
Totalt: 481 träffar
RefereraExporteraLänk till posten
Permanent länk

Direktlänk
Referera
Referensformat
  • apa
  • ieee
  • modern-language-association-8th-edition
  • vancouver
  • Annat format
Fler format
Språk
  • de-DE
  • en-GB
  • en-US
  • fi-FI
  • nn-NO
  • nn-NB
  • sv-SE
  • Annat språk
Fler språk
Utmatningsformat
  • html
  • text
  • asciidoc
  • rtf