The transient hot-wire technique was used to determine the thermal conductivity, λ, and the specific heat capacity per unit volume, ρcp, of cyclohexane up to 1.5 GPa in the range 120–340 K. The measurements were carried out in a piston-cylinder apparatus, 45 mm in internal diameter, cooled by liquid nitrogen. There is only a small (6%) increase in λ on freezing, while there is an increase by a factor of two corresponding to the plastic→ normal crystal transition. The variation of λ with temperature (T) at P = 0.03 GPa is d(lnλ)/dT = −2.2×10−3K−1 for the liquid and d(ln λ)/dT = −0.9×10−3K−1 for the plastic crystalline phase. In the normal crystal phase an approximate T−1 dependence is observed. Within each of the phases λ increases linearly with pressure, and the slope of λ (P) is smallest in the plastic crystal phase. The existence of a recently reported new high pressure phase is evident from conductivity data. Qualitative ρcp -results are reported.