Umeå universitets logga

The position of the emission zone (EZ) in the active material of a light-emitting electrochemical cell (LEC) has a profound influence on its performance because of microcavity effects and doping- and electrode-induced quenching. Previous attempts of EZ control have focused on the two principal constituents in the active material—the organic semiconductor (OSC) and the mobile ions—but this study demonstrates that it is possible to effectively control the EZ position through the inclusion of an appropriate additive into the active material. More specifically, it is shown that a mere modification of the end group on an added neutral compound, which also functions as an ion transporter, results in a shifted EZ from close to the anode to the center of the active material, which translates into a 60% improvement of the power efficiency. This particular finding is rationalized by a lowering of the effective electron mobility of the OSC through specific additive: OSC interactions, but the more important generic conclusion is that it is possible to control the EZ position, and thereby the LEC performance, by the straightforward inclusion of an easily tuned additive in the active material.

Temporal filtering and spectral broadening are simultaneously achieved, allowing the compression of 20 fs laser pulses down to sub-4 fs duration through the method of nonlinear elliptical polarization rotation in an argon filled hollow-core fiber. The sub-4 fs source provides ~ 35-µJ energy with an internal efficiency >50%, which is more than from the most commonly used pulse-cleaning methods. Further, the contrast is improved by 3 orders of magnitude when measured after amplifying the pulses to 16 TW using non-collinear optical parametric chirped pulse amplification with a prospect to even further enhancement.

Understanding “efficiency roll-off” (i.e., the drop in emission efficiency with increasing current) is critical if efficient and bright emissive technologies are to be rationally designed. Emerging light-emitting electrochemical cells (LECs) can be cost- and energy-efficiently fabricated by ambient-air printing by virtue of the in situ formation of a p-n junction doping structure. However, this in situ doping transformation renders a meaningful efficiency analysis challenging. Herein, a method for separation and quantification of major LEC loss factors, notably the outcoupling efficiency and exciton quenching, is presented. Specifically, the position of the emissive p-n junction in common singlet-exciton emitting LECs is measured to shift markedly with increasing current, and the influence of this shift on the outcoupling efficiency is quantified. It is further verified that the LEC-characteristic high electrochemical-doping concentration renders singlet-polaron quenching (SPQ) significant already at low drive current density, but also that SPQ increases super-linearly with increasing current, because of increasing polaron density in the p-n junction region. This results in that SPQ dominates singlet-singlet quenching for relevant current densities, and significantly contributes to the efficiency roll-off. This method for deciphering the LEC efficiency roll-off can contribute to a rational realization of all-printed LEC devices that are efficient at highluminance.